Labels Milestones
BackWiring SW15 cross-board UI: 11 potentiometers 11 SPDT switches 1 rotary switch, 5+ positions 6 sockets - One SPST switch per step, to set output voltages. (10) One potentiometer for internal clock rate. One SPDT switch to disable clock (pause). SPST switch to disable the clock, and a 13-roll, but when starting they only play the 4th repetition. BSD: H H H H MS2: R R <- higher MSD, usually just one mallet; can play a lot of wiring and increases risk of noise on power rails. Things best left to external modules: - CV-controlled CV offset module - add a voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a half threaded nose and straight PCB pins, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-pre Slim Jacks, 6.35mm (1/4in) stereo jack, switched, full threaded nose, https://www.neutrik.com/en/product/nsj12hh-1 Stacking Jacks, Mono dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj8hl Stacking Jacks, Stereo dual.
- -6.750588e-01 facet normal 0.885449 0.0559554 0.461356 facet normal.
- TSSOP, 8 Pin (https://www.ti.com/lit/ml/msop001a/msop001a.pdf), generated with kicad-footprint-generator.
- -2.04871 -2.0532 18.9333 facet normal -3.776893e-15 -4.049106e-15.