synth_tools

Back

3.5mm height Choke, SMD, 12x12mm 8mm height 11.5mm Non-Polar Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=10*6mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 7.50mm diameter 11mm width 5.0mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*4.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 11.43mm diameter 16.8mm Vishay IHB-1 Inductor, Radial series, Radial, pin pitch=22.50mm, , length*width=24*8.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 5.08mm length 26mm diameter toroid L_Toroid, Horizontal series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.7mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf Inductor Radial series Radial pin pitch 10.00mm length 11.0mm solder Pin_ with flat with hole, hole diameter 1.2mm THT pad as test Point, square 2.0mm side length SMD rectangular pad as test Point, diameter 1.0mm wire loop as test Point, diameter 4.0mm Plated Hole as test Point, square 2.0mm side length SMD rectangular pad as test point, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00068, 3 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.2mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 15x10.5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 1 pins, pitch 3.81mm, size 18.9x7.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR vertical pitch.

New Pull Request

Labels Milestones