synth_tools

Back

Http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5801.pdf LFCSP VQ, 24 pin, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf 20-Pin Thermally Enhanced Thin Shrink Small Outline (SO), see https://docs.broadcom.com/docs/AV02-0173EN 4-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1695.pdf DF Package; 12-Lead Plastic DFN (2mm x 2mm) (see Linear Technology 05081707_A_DHD16.pdf DH Package; 16-Lead Plastic TSSOP (4.4mm); Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf DCB Package 8-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1725.pdf DE/UE Package; 12-Lead Plastic Micro Small Outline Narrow Body Body [QSOP] (see Microchip Packaging Specification 00000049BS.pdf 8-Lead Plastic Dual Flat, No Lead Package (ML) - 8x8x0.9 mm Body (http://ww1.microchip.com/downloads/en/DeviceDoc/20005010F.pdf 8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/84299/vor1142b4.pdf SSO Stretched SO SOIC Pitch 1.27 SSOP-8 2.9 x2.8mm Pitch 0.65mm SSOP, 8 Pin (https://www.ti.com/lit/pdf/qfnd619), generated with kicad-footprint-generator ipc_noLead_generator.py WSON, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf#page=15), generated with kicad-footprint-generator JST SH series connector, BM15B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-10DS-0.5V, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, S04B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator connector JST EH series connector, S6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 4.5, Wuerth electronics 9774025243 (https://katalog.we-online.de/em/datasheet/9774025243.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4170, 17 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with.

New Pull Request

Labels Milestones