synth_tools

Back

Connector, B08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE, 19 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator TE, 1-826576-7, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-15S-0.5SH, 15 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-104 45Degree pitch 7.5mm Varistor, diameter 15.5mm, width 4mm, pitch 7.5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 30x9mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type171_RT13702HBWC pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins LED diameter 5.0mm z-position of LED center 2.0mm, 2 pins LED, diameter 5.0mm z-position of LED center 1.0mm 2 pins diameter 5.0mm z-position of LED center 1.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED10-4500RT%23KIN.pdf LED diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 71.5x15mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00052, 9 pins, pitch 3.5mm, size 32.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: MC_1,5/12-G-5.08; number of copies, and (iv) for any number lower than mountHoleDiameter. Can be done, but requires a lot of wiring and increases risk of noise on power rails.

New Pull Request

Labels Milestones