synth_tools

Back

"defaults": { PCB initial layout, no traces One SPST switch to set output voltages. (10) - One per step, to set clock rate (if onboard clock is used) (rv11 // 1 for run/stop (sw14 // 1 for manual glide (rv16 // Everything OUT goes on the bottom of box [right_edge, -extra_depth], // bottom horizontal rib // h_wall(h=4, l=right_rib_x); // middle horizontal rib h_wall(h=4, l=right_rib_x); // middle horizontal rib // h_wall(h=4, l=right_rib_x); // one more vertical to mount the circuit board sideways on HP = 5.07; // 5.07 for a single 1.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, size 7x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 3 pins, pitch 3.5mm, size 35x7.6mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00067, 2 pins, pitch 9.52mm, size 28.6x12.5mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360273, block size 5x5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360291, block size 5x5mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex CLIK-Mate series connector, 505405-0270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator JST GH series connector, 502386-0770 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90325-0010, 10 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator.

New Pull Request

Labels Milestones