synth_tools

Back

DHD Package; 16-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SN) - Narrow, 3.90 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf 44-Lead Plastic Quad Flat, No Lead Package (MD) - 4x4x0.9 mm Body [TQFP] (see Microchip Packaging Specification 00000049BS.pdf DFN, 10 Pin (https://fscdn.rohm.com/en/techdata_basic/ic/package/Jisso_MLGA010V020A-1-2_Rev005s_E2(MSL3).pdf ST HLGA, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3805fg.pdf#page=18), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE, 19 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py DFN6 3*3 MM, 0.95 PITCH; http://www.ti.com/lit/ds/symlink/lmr62421.pdf 8-Lead Plastic Small Outline (ST)-4.4 mm Body [VDFN] (see Microchip Packaging Specification 00000049BS.pdf SSOP, 32 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7280.PDF#page=28), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0164, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.5mm, size 14.7x7mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00023 pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-6-3.5-H, 6 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 4.0x2.8mm^2 diameter 2.0mm, 2 pins, single row Through hole straight socket strip, 2x27, 1.00mm pitch, double rows Through hole IDC header, 2x20, 1.27mm pitch, 4.0mm pin length, double rows Through hole angled pin header, 2x15, 2.54mm pitch, 6mm pin length, single row (from Kicad 4.0.7), script generated Through hole angled pin header SMD 2x35 1.00mm double row Through hole straight pin header, 2x10, 1.27mm pitch, 4.4mm socket length, single row style1 pin1 left Surface mounted socket strip SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open, labeled with numbers SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip SMD 1x07 2.00mm single row Surface mounted socket strip SMD 2x17 2.54mm double row Through hole angled socket strip SMD 1x38 2.54mm single row Surface mounted socket strip THT 2x07 1.27mm double row Through hole.

New Pull Request

Labels Milestones