Labels Milestones
BackSwitch, normally closed, generic, four pins D Push button switch, normally closed, generic, four pins D Push button switch, generic, separate symbols, four pins D Push button switch, normally closed, generic, four pins D Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push 6mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push PVA2 DPDT momentary / push-push button, h=13mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf tact sw push 6mm smd CK components KMR2 tactile switch SPST right angle, http://www.nkkswitches.com/pdf/GW.pdf switch single-pole double-throw ON-OFF-ON D Single Pole Single Throw (SPST) switch with LCD screen K switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch, small symbol D 5x DIP Switch, Single Pole Single Throw (SPST) switch with 6 2x8 IDC power connectors to supply Eurorack voltage. Updates to rev 2 Notes on needed revisions from revision 1: Corrected: Fix silkscreen misalignment for lower three knobs 4efd2875e8 Replaced accidentally dropped Fine tuning hole. Latest commits for file Schematics/SynthMages.pretty/IDC-Header_2x05_P2.54mm_Vertical_Fixed_Ground_Fill.kicad_mod Fix annoyance of 2x05 IDC header triangle being so far out ...Header_2x05_P2.54mm_Vertical_Fixed_Ground_Fill.kicad_mod | 6 Synth Mages Power Word Stun.kicad_pro PSU \+12V, -12V and ground needed, probably up to 1amp