Labels Milestones
Back1803332 8A 160V Generic Phoenix Contact SPT 1.5/4-H-3.5 1990753 Connector Phoenix Contact connector footprint for: MSTBVA_2,5/2-G; number of pins: 15; pin pitch: 3.81mm; Angled || order number: 1776744 12A || order number: 1847628 8A 320V Generic Phoenix Contact SPT 2.5/4-H-5.0-EX Terminal Block, 1719370 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719370), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2210, 22 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP, 24 Pin (http://www.ti.com/lit/ds/symlink/lm26480.pdf#page=39), generated with kicad-footprint-generator Inductor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Soldered wire connection, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat with fork, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ loose fit solder Pin_ loose fit solder Pin_ loose fit solder Pin_ press fit solder Pin_ diameter 1.3mm, wire diameter 1.0mm wire loop bead wire loop with bead as test point, pitch 6.35mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00306, 10 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-7-2.54 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, hole diameter 1.3mm, hole diameter 2.0mm THT pad as test point, loop diameter 3.8mm, hole diameter 1.5mm THT rectangular pad as test point, pitch 6.35mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 52.5x7.6mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 39.8x14mm^2.
New Pull Request