Labels Milestones
Back236-516, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 30x9mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-14 pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm single screw terminal thread redcube thr power connector REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650173.pdf REDCUBE THR with internal clock rate. One SPDT switch to disable the clock, and a switch to adjust CV output range, switch between 5v and 2.5v max. One per step, to enable/disable gate per step. (10 One SPDT switch per step, to set clock rate (if onboard clock is used) (rv11 // once/continuous (sw15 // pause cv in (j18/j19 // run/stop (sw14 h_wall(h=4, l=slider_spacing*10-1, th=1); v_wall(h=4, l=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); //outline of whole PCB cube([137.5, 97, 1], center=true); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - h_margin; // special: the right-hand side tries to squeeze 6 rows into the space of 5 out_working_increment = working_increment * 4 / 5; row_1 = bottom_row + v_margin + 12; title_font = 10; // Number of faces around the outer circumference of the Pelorinho