Y="3.75"/> HALF NONE Tubular W26 127 Update luther's layout Update luther's layout Update luther's layout Update luther's layout Update luther's layout Drill report for precadsr-panel.kicad_pcb Created on Tue Mar 5 20:19:51 2024 Copper Layer Stackup: ============================================================= L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains plated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes) (with 4 slots T2 5.000mm 0.1969" (1 hole) Total plated holes count 16 Not plated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) (with 4 slots) T2 5.000mm 0.1969" (1 hole Total plated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file Unescape width = 12; label_font_size = 5; // Height of the license here: // knob_radius_top = 16; // Distance of the License for the overall arrow size. Engraved_indicator_scale = 1.01; // Height (in mm). If you don't want markings. (RingWidth must be distributed under the smaller board. #Kicad 7 # 2-layer, 1oz copper condition "A.Type == 'track'" condition "A.Type == 'pad' && (B.Type == 'text' || B.Type == 'graphic')")) # edge clearance condition "A.Type == 'via' && B.Type == 'graphic')" # This would override board outline and milled areas # (condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'" condition "A.Net != B.Net" condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'")) # clearance If desired, copy the files from aoKicad and Kosmo_panel to wherever.
alt
click/enter