Labels Milestones
BackHttps://www.neutrik.com/en/product/nc3fbv2-sw B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-v Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fav B Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, ISO Enter, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 1.50u Matias/ALPS keyswitch, 2.25u, http://matias.ca/switches/ Matias ALPS keyswitch 2.25u Matias/ALPS keyswitch, ISO Enter, http://matias.ca/switches/ Matias ALPS keyswitch 6.25u PCB Cherry MX keyswitch 2.00u vertical PCB mount, color coding possible, https://www.neutrik.com/en/product/nc5fav-sw A Series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 2.75u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch 2.00u PCB Cherry MX keyswitch 2.00u vertical plate Cherry MX keyswitch 2.00u vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-1 B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav2-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-h-0 neutrik jack combo i Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel. - Current design uses six IDC 2×8 connectors with 4 positions D 4 rotary switches with 4 unused pins.
- Final tweaks, version submitted to JLCPCB on.
- 0.0731528 -0.0677834 0.995015 vertex.
- 0.8 mm Highspeed card.