Labels Milestones
Back804-311, 45Degree (cable under 45degree), 7 pins, pitch 5.08mm, revamped version of the rail + a safety margin // margins from edges v_margin = hole_dist_top*2 + thickness; v_margin = hole_dist_top*2 + thickness; col_left = thickness * 1.2; right_rib_x = width_mm - h_margin; cv_in = [first_col, fourth_row, 0]; triangle_out = [output_column, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; manual_2 = [left_col, row_7, 0]; cv_in_1b = [right_col, row_1, 0]; audio_out_2 = [right_col, row_3, 0]; c_tune = [second_col, second_row, 0]; //Third row interface placement sync_in = [first_col, third_row, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; triangle_out = [output_column, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; pwm_in = [input_column - h_margin/2, row_1, 0]; square_out = [output_column, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; manual_2 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_1, 0]; f_tune = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; Panels/luther_triangle_10hp.stl Normal file View File Panels/label_test.stl Normal file Unescape Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-SilkBottom.gbo Normal file View File 62cb30efbf Initial kicad, images, gitignore for kicad backups afea9d5a2c Final revision; added custom DRC as project file.
- Olinuxino LIME2, 1.2GHz, 512-1024MB RAM.
- -9.055258e+01 9.665134e+01 1.561034e+01 vertex -9.055258e+01 9.665134e+01 1.561034e+01 vertex.