synth_tools

Back

1836202 8A 320V Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-3.81; number of pins: 05; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843224 8A 160V Generic Phoenix Contact connector footprint for: GMSTBA_2,5/2-G-7,62; number of pins: 16; pin pitch: 5.08mm; Angled; threaded flange || order number: 1803277 8A 160V Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.81; number of pins: 15; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847660 8A 320V Generic Phoenix Contact SPT 2.5/8-H-5.0 Terminal Block, 1990999 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990999), generated with kicad-footprint-generator Mounting Hardware, inside through hole 4.5mm, height 8, Wuerth electronics 9776020960 (https://katalog.we-online.com/em/datasheet/9776020960.pdf), generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7045_en.pdf Inductor, TDK, SLF12575, 12.5mmx12.5mm (Script generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-11-2.54 pitch 2.54mm size 28.4x6.2mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00235 pitch 5.08mm length 26mm diameter 11mm Fastron 77A Inductor, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf CP Axial series Axial Vertical pin pitch 15.24*22.86mm^2 length 34.29mm width 20.32mm Bourns 8100 3 Phase, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X140.pdf 3 Phase, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X140.pdf 3 Phase, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X140.pdf 3 Phase, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X240.pdf Wuerth, WE-CMB, Bauform XXL, Lodestone Pacific, 40.64mm diameter vertical toroid mount, 11x19mm, 6 pins, pitch 3.5mm, size 31.5x7.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type067_RT01903HDWC pitch 10mm size 105x8.1mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00057 45Degree pitch 5mm size 60x10mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00298 pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-309 45Degree pitch 10mm size 25x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-301, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-624 45Degree pitch 5mm size 30x10.5mm^2 drill 1.4mm pad 2.7mm terminal block RND 205-00088 pitch 10mm Varistor, diameter 21.5mm.

New Pull Request

Labels Milestones