synth_tools

Back

Potentiometer, horizontal, ACP CA9-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf Potentiometer vertical Vishay T73YP Abracon RHCP ceramic patch antenna 854-882Mhz, 5dBi Johanson 2450AT43F0100 SMD antenna 2400-2500Mhz, 1dBi, https://www.johansontechnology.com/datasheets/2450AT43F0100/2450AT43F0100.pdf Pulse RF Antenna, 4mm Clearance 6-pin 1.6x0.8 mm balun footprint Johanson 0900PC15J0013 DFN, 10 Pin (https://www.ti.com/lit/ds/symlink/bq24090.pdf), generated with kicad-footprint-generator Fuse SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator connector wire 0.127sqmm strain-relief Soldered wire connection with feed through strain relief, for 2 times 2 mm² wires, basic insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-512 45Degree pitch 5mm size 15x7.6mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type067_RT01903HDWC pitch 10mm size 95x8.1mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm size 50.8x11.2mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type011_RT05505HBWC, 5 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-5-3.5-H, 5 pins, pitch 5.08mm, size 71.1x11.2mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00240, 10 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00232, 2 pins, diameter 3.0mm Plated Hole as test Point, square 2.0mm.

New Pull Request

Labels Milestones