synth_tools

Back

Width 4.7mm, pitch 7.5mm size 60x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00029, 8 pins, pitch 3.5mm, size 11.2x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00018, 8 pins, https://www.diodes.com/assets/Datasheets/ZXSBMR16PT8.pdf 8-pin SOT-383FL package, http://www.onsemi.com/pub_link/Collateral/ENA2267-D.PDF SOT-543 4 lead surface package SOT 963 6 pins package 1x0.8mm pitch 0.35mm SOT-1123 small outline package; 56 leads (see NXP sot054_po.pdf TO-92 leads molded, narrow, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf TO-92L Inline Wide transistor TO-92Mini package, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot371-1_po.pdf STC SOP, 16 Pin (https://www.diodes.com/assets/Datasheets/PI6C5946002.pdf#page=12), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-169 , 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF63 through hole, DF11-8DP-2DSA, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, 53398-0271 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 2 mm² wires, basic insulation, conductor diameter 1.7mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-209, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 95x8.1mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 11 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 4.8x2.5mm^2 diameter 2.0mm, hole diameter 1.0mm wire loop as test Point, diameter 4.0mm, hole diameter 1.0mm wire loop with bead as test point, pitch 3.81mm, size 7.51x7.3mm^2, drill diamater 0.7mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00009, 10 pins, pitch 10.2mm, size 107x8.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block.

New Pull Request

Labels Milestones