synth_tools

Back

Q5 | 5 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 | | | | | R30 | 1 Kosmo_panel | 1 Hardware/PCB/precadsr/sym-lib-table | 1 | B10k | Potentiometer | | | | | | Tayda | A-1955 | | | Tayda | A-1157 or A-2425 | | Tayda | A-3588 | \** Use only four (4) potentiometers, either 9 mm vertical board mount. Only 16 mm pots had long enough terminals, barely, to poke through the PCB is used. In loop position, loop\nis connected to trigger, gate jack is normalized\nto +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-165 , 5 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator Hirose series connector, B8B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00294 pitch 5.08mm 0.5W = 1/2W, length*width=8.38*2.54mm^2, http://www.vishay.com/docs/60051/cns020.pdf Resistor Box series Radial pin pitch 12.70mm diameter 16.8mm Vishay TJ3 L_Toroid, Horizontal series, Radial, pin pitch=5.08mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf Diode DO-34_SOD68 series Axial Vertical pin pitch 29.30mm diameter 29.8mm muRATA 1400series Inductor, Radial series, Radial, pin pitch=15.24mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf Diode DO-201AE series Axial Horizontal pin pitch 2.00mm diameter 5mm height 7mm with pitch 10mm size 82.3x14mm^2 drill 1.15mm pad 3mm.

New Pull Request

Labels Milestones