synth_tools

Back

Inductor, Sumida, 8.1mm × 7.3mm × 5.5 mm, Unshielded, http://products.sumida.com/products/pdf/CR75.pdf Inductor SMD 1806 (4516 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator JST SH series connector, 502382-1070 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator JST PUD series connector, BM04B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator Molex Nano-Fit Power Connectors, 105310-xx06, 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Molex Mini-Fit Jr. Power Connectors, 105314-xx06, 3 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.1 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02705HBLC pitch 7.5mm Varistor, diameter 9mm, width 3.3mm, pitch 5mm Varistor, diameter 7mm, width 3.5mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ with flat fork solder Pin_ with flat with fork, hole diameter 1.85mm wire loop as test Point, diameter 2.0mm, 2 pins LED_Rectangular, Rectangular, Rectangular size 3.3x2.4mm^2 diameter 1.8mm, hole diameter 1.5mm SMD pad as test point, pitch 2.54mm, size 20.78x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-408 45Degree pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MPT-0,5-4-2.54 pitch 2.54mm size 30.94x6.5mm^2 drill 1.1mm.

New Pull Request

Labels Milestones