synth_tools

Back

11x DIP Switch, Single Pole Single Throw (DPST) Switch K switch dual double-pole single-throw OFF-ON D Double Pole Single Throw (SPST) switch D MEC 5G single pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 | | | Tayda | A-1157 or A-2425 | | R24, R26, R28 | 4 .../precadsr-Edge_Cuts.gbr | 30 .../precadsr_aux_Gerbers/precadsr-F_Mask.gbr | 266 .../precadsr_aux_Gerbers/precadsr-B_Paste.gbr | 15 .../precadsr-panel-SilkBottom.gbo | 799 .../precadsr-panel-drl_map.pdf | Bin 0 -> 12724 bytes .../POLYMORPH.png | Bin 0 -> 33312 bytes Panels/FireballSpellVertSmaller.png | Bin 0 -> 10724 bytes .../Panels/MAGIC MISSILE VCF.png Normal file Unescape left_rib_x = hole_dist_side + thickness; working_height = height - v_margin - title_font_size*1.5; saw_out = [third_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_2, 0]; audio_in_2 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_2, 0]; cv_2b_atten = [right_col, row_1, 0]; triangle_out = [output_column, bottom_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; manual_2 = [left_col, row_7, 0]; audio_out_1 = [right_col, row_5, 0]; cv_in_2a = [left_col, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_1, 0]; left_rib_x = thickness + 6 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - v_margin - title_font_size*2; working_width = width_mm - 9.5/2 - right_rib_thickness - tolerance; // left_rib_x = thickness * 1.2; right_rib_x = width_mm - h_margin; working_height = height - v_margin - title_font; saw_out = [third_col, fifth_row, 0]; //left_rib_x = thickness + 6 + tolerance; rail_depth = 27.4 + tolerance; rail_depth = 27.4 + tolerance; rotate_vector_cos = 0.94; // 'x' of 20 degree rotation rotate_vector_sin = 0.34; // 'y' of rotation left_edge = -rotate_vector_sin * rail_depth; right_edge = height - v_margin - title_font; saw_out = [output_column, bottom_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, row_1, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; square_out = [output_column, row_2, 0]; } // Timothy Winchester (People I Know Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Jack_Hole.kicad_mod Normal file Unescape.

New Pull Request

Labels Milestones