Labels Milestones
Back- glide in (sleeve and normal both GND 6x Sockets, 2pin: - reset Pots, 3-pin: Glide attenuator (B10k) (join two left pins from below) - Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 5.0x5.0mm^2 2 pins diameter 3.0mm z-position of LED center 1.6mm 2 pins LED_Oval, Oval, Oval size 5.2x3.8mm^2, 2 pins, diameter 3.0mm z-position of LED center 3.0mm 2 pins grey LED, diameter 5.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 10x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 3.5mm, size 46.2x7mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 8 pins, pitch 2.54mm, size 18.2x6.2mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-608, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch.
- | 46 ..._Vertical_CircularHoles_centered.kicad_mod | 46 ..._Vertical_CircularHoles_centered.kicad_mod .
- (or else, saying that you changed.
- Two holes hole_r = 1.7.