synth_tools

Back

Defined by Sections 1 and 2 connected via insulated copper area below body, vias included (case drawing: https://ww2.minicircuits.com/case_style/CD542.pdf, land pattern PL-236, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf Footprint for Mini-Circuits case GP1212 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-079, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf Footprint for mini circuit case CD542, Land pattern PL-094, pads 5 and 6 // manual reset (sw16 // 8 Sockets: // clock out (j5/j12) // glide in (sleeve and normal both GND) 6x Sockets, 2pin: - reset Pots, 3-pin: Glide attenuator (B10k) (join two left pins from below) - Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm z-position of LED center 1.6mm 2 pins LED, diameter 5.0mm, 3 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.2mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05506HBWC, 6 pins, pitch 5.08mm, hole diameter 1.4mm wire loop as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 0.7mm, wire diameter 0.8mm wire loop as test point, pitch 2.54mm, size 13.16x6.5mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type059_RT06304HBWC, 4 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41792-0014 example for new mpn: 39-30-0080, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST XH series connector, 53398-1071 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator Hirose DF12E SMD, DF12E3.0-36DP-0.5V, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose series connector, S9B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41791-0014 example for new part number: A-41791-0016 example for new part number: 09-65-2068, 6 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated.

New Pull Request

Labels Milestones