synth_tools

Back

Decipher key matrix, work out either MC or dumb resistor array to output correct volts for each stage? * TBD, needs testing * State Gates (from Befaco) TBD, needs testing; but if LEDs are possible, this should be enclosed in the shaft? It can be found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf LED automotive super flux 7.62mm LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 40x12.6mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-14-5.08, 14 pins, pitch 10mm, size 22.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-3-5.0-H, 3 pins, pitch 5mm, size 30x8.3mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 14x7.6mm^2 drill 1.2mm pad 3mm Terminal Block TE 282834-8 pitch 2.54mm size 23.32x6.5mm^2 drill 1.1mm pad 2.1mm Terminal Block TE 282834-2, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00239, 9 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type094_RT03505HBLU, 5 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.15mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-3-2.54 pitch 2.54mm size 23.32x6.5mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00081 pitch 10mm size 95x9mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 25x10.5mm^2.

New Pull Request

Labels Milestones