synth_tools

Back

Mount, https://www.neutrik.com/en/product/nl4md-v-2 speakON Chassis Connectors, 4 pole male XLR receptacle, grounding: mating connector shell and front panel, steel retention lug, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/ncj6fa-v Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbhl B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, lateral left PCB mount, https://www.neutrik.com/en/product/nl8md-v-1 speakON Chassis Connectors, 4 pole chassis connector, red D-size flange, countersunk thru holes, vertical PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu 3.5mm horizontal headphones jack, http://akizukidenshi.com/download/ds/switronic/ST-005-G.pdf Connector Audio Switronic ST-005-G 3.5mm Horizontal Waterproof Stereo Headphones Jack, https://www.technik.com.hk/images/pdf_product/WP3002-PA66-A.pdf audio jack horizontal PJ311 6pin SMD 3.5mm stereo headphones jack. Headphones jack plug stereo 3.5mm PJ311 Headphones with microphone connector, 3.5mm, 4 pins RGB RGBLED LED, Round, FlatTop, Rectangular size 3.0x2.0mm^2, 2 pins, pitch 2.5mm, size 15.5x5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00242 pitch 10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-16, 16 pins, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.3mm, pad diameter 2.7mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0610, with PCB locator, 15 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator Molex CLIK-Mate series connector, 53261-1471 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0150, 15 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator Mounting Hardware, inside through hole PLCC, 28 pins, 18.8x8mm body, 0.55mm pitch, IPC-calculated pads (http://ww1.microchip.com/downloads/en/devicedoc/doc0807.pdf TSOP I 32 reverse TSOP-I, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator JST GH series connector, S28B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 9774030982 (https://katalog.we-online.de/em/datasheet/9774030982.pdf), generated with.

New Pull Request

Labels Milestones