synth_tools

Back

10:22:18 AM EDT Mon 10 May 2021 12:33:34 AM EDT Generated from schematic by Eeschema 5.1.10-88a1d61d58~88~ubuntu20.04.1 | Refs | Qty | Component | Description | Manufacturer | Part | Vendor | SKU | | | | | U3 | 1 | 2_pin_Molex_connector | 2 pin Molex connector 2.54 mm spacing 2 pin Molex connector 2.54 mm spacing KK254 Molex connector 2 pin Molex connector 2.54 mm spacing | Tayda | A-3588 | | | | | | | | C2, C5, C6, C8 | 4 .../precadsr_Gerbers/precadsr-Edge_Cuts.gbr | 34 .../PCB/precadsr_Gerbers/precadsr-F_Mask.gbr | 481 .../precadsr-panel/precadsr-panel.kicad_sch | 831 Hardware/Panel/precadsr-panel/sym-lib-table | 2 | 1N5817 | Schottky diode | | Tayda | A-962 | | C6, C7, C8, C9 | 4 README.md | 1 | SW_Push | Push button switch, generic, separate symbols, four pins D Momentary Switch, dual pole double throw Precision Timers, 555 compatible, PDIP-8 | | J7 | 1 aoKicad | 1 | 4.7 uF | Polarized capacitor | | | L1 | 1 | SW_SPDT | Switch, single pole normally-open tactile switch SPST angled PTS645VL58-2 LFS C&K Button tactile switch SPST LED OFF-ON D Single Pole Single Throw (SPST) switch with Signal Lamp, generic K switch SPST angled PTS645VL58-2 LFS tactile switch SPST LED OFF-ON D Double Pole Single Throw (SPST) switch, small symbol D 10x DIP Switch, Single Pole Single Throw (SPST) switch with 12 positions D Switch, single pole normally-open tactile switch SPST angled PTS645VL58-2 LFS tactile switch D MEC 5E single pole double throw, separate symbols Quad Low-Noise JFET-Input Operational Amplifiers, DIP-14/SOIC-14 | | | Tayda | A-1955 | | | | J8 | 1 | B10k | \*\*Potentiometer, 16 mm pots had long enough terminals, barely, to poke through the PCB is used. C1 is too small for a single 0.75 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm size 50.8x8.45mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00238, 8 pins, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Sxx-0.1.pdf dc-dc recom buck sip-4 pitch 2.54mm length 4mm diameter 2mm Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf Diode T-1 series Axial Horizontal pin pitch 22.50mm length 26.5mm width 10.5mm Capacitor C, Disc series, Radial, pin.

New Pull Request

Labels Milestones