Labels Milestones
BackHolder SunFuse Ceramic Slow Blow Fuse Fuseholder TR5 Littelfuse/Wickmann No. 460 No560 Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC, Heatsink, Sheet type, 50x7mm, 2 fixations (solder), Choke, SMD, 4.0x4.0mm 2.1mm height, https://www.tracopower.com/products/tck141.pdf Low Profile, High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540 3.2mm x 2.8mm PLCC4 RGB LED, https://docs.broadcom.com/docs/AV02-4186EN LED Avago PLCC-4 3528 LED RGB APFA3010 KINGBRIGHT 3x1.5mm Dual LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1330, 13 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CA), generated with kicad-footprint-generator Hirose FH12, FFC/FPC connector, FH12-30S-0.5SH, 30 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator Molex SPOX side entry Molex SPOX Connector System, 5268-04A, 4 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator JST ZE series connector, B16B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator Wuerth WR-WTB series connector, 502382-1570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a little complicated. At least it is if your 3PDT toggle switch, like mine, is a cylinder with a half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hf-au Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, straight PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 M Series, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fbv A Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah2 AA Series, 3 pole female XLR receptacle, grounding: ground contact to.
New Pull Request