synth_tools

Back

Ref="R12" pin="1"/> main MK_VCO/Fireball/Fireball_panel.kicad_pro 505 lines { "board": { updates to rev 2 beta edits README.md file again edits README.md file again README.md | 2 | | | | J11 | 3 | 10k | Resistor | | R16, R17, R19, R20 **Potentiometer, 9 mm or 16 mm vertical board mount OR: **Potentiometer, 16 mm vertical board mount. Only 16 mm vertical board mount | | Tayda | A-1605 | \* Fit SIP socket for\nsocketing capacitors C13 marked 1 nF\non first run PCBs as 1 nF. It should be possible, too * See manual step button in Unseen Servant functions tracks the ratsnest and compactifies the power subsystem tracks the ratsnest and compactifies the power safety block and into any non-high-impedence connections; that is, fat traces to chip power, but not to front panel Added schmancy pcb for v2 front panel design and includes 2.5mm centerward shift for input and output jacks 7f9b624c8e tweaks layout with input from sam format (units 2) (units_format 1) (precision 4 style (thickness 0.15) (arrow_length 1.27) (text_position_mode 0) (extension_height 0.58642) (extension_offset 0) keep_text_aligned (text "Kassu used 1 µF \npolyester film looks much \nbetter. Low-Power, Quad-Operational Amplifiers, DIP-14/SOIC-14/SSOP-14 Small Signal NPN Transistor, TO-92 KK254 Molex connector 2.54 mm spacing Q1, Q2, Q3 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be height of the stem. [mm] knob_height = 5; //mm center_col = width_mm/2; //mm third_col = 60.7-center_adjust; //mm cv_in = [h_margin, row_1, 0]; saw_out = [output_column, row_2, 0]; fm_in = [first_col, third_row, 0]; //Fourth row interface placement triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [third_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_3, 0]; c_tune = [width_mm/2.

New Pull Request

Labels Milestones