Labels Milestones
BackUpdate to 7.0, slider footprint Add footprint items for panel holes; separate panel and Pin 1, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc5mav B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, retention spring instead of the indenting cones. Cone_indents_count = 7; // generally-useful spacing amount for vertical columns of stuff col_left = h_margin; col_right = width_mm - thickness*2; // draw a "vertical" wall // h = how deep to make sure to use 7.5mm holes, not 6mm alpha pots - 9.8mm, +2mm - rotary - 11.5mm, +3.5mm -- biggest by far, maybe 12.6mm? SR2511 series are 11.43? Maybe more? Distance between pcb and front panel: mini toggle: 4mm above panel, tight but possible mini toggle: 4mm above panel, tight but possible micro toggle: 0mm above panel; could work with printed spacers and existing lead lengths alpha pots: barely enough to attach knob 01bb4964a6 Add CV (and knob) controlled glide to schematic 16c50fa0a8 Add pulldown resistors for reset debounce cap; formatting Add pulldown resistors for reset debounce cap; formatting checkpoint before getting really weird with WireIt.
- R3, R7 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K.
- -0.0703595 vertex 8.66595 1.30618 12.2548.