synth_tools

Back

28 pins TSOP-I, 32 Pin (https://www.ti.com/lit/ds/symlink/ads127l01.pdf#page=87), generated with kicad-footprint-generator Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FH12-6S-0.5SH, 6 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-144 , 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 11.6, Wuerth electronics 9774100951 (https://katalog.we-online.de/em/datasheet/9774100951.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 53047-0910, 9 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 0.5mm, outer diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect 360322, block size 5x4mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00057, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 69.8x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 1-282834-2, 12 pins, pitch 3.5mm, size 36x8.3mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-16-5.08, 16 pins, pitch 5mm, size 56.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type703_RT10N03HGLU pitch 9.52mm size 28.6x12.5mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-9-3.5-H pitch 3.5mm size 17.5x6.5mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-316 45Degree pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MPT-0,5-6-2.54, 6 pins, pitch 3.81mm, size 11.3x7.3mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 7 pins, pitch 5.08mm, hole diameter 1.3mm, hole diameter 1.0mm low profile wire loop as test Point, square 2.5mm side length, hole diameter 2.0mm SMD pad as test point, pitch 7.62mm, hole diameter 1.5mm THT pad rectangle square SMD pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 2 pin, 2.0mm square SMD pads Net.

New Pull Request

Labels Milestones