synth_tools

Back

In (sleeve and normal both GND 6x Sockets, 2pin: Gate out (could normal to TP10, optional) - Casc Out normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below - Clock rate (B100k) (not sure yet which 2 pins Rectangular size 3.9x1.8mm^2 2 pins grey LED, diameter 4.0mm, hole diameter 0.5mm test point plated hole Plated Hole as test point, loop diameter2.6mm, hole diameter 1.5mm THT rectangular pad as test Point, diameter 1.0mm THT pad as test Point, square 2.5mm side length SMD rectangular pad as test Point, diameter 3.0mm, hole diameter 1.4mm wire loop wire loop as test point, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00087, 11 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-101, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 25x12.5mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 6 pins, pitch 5mm, size 17.3x14mm^2.

New Pull Request

Labels Milestones