Labels Milestones
BackPhoenix PT-1,5-14-5.0-H pitch 5mm Varistor, diameter 7mm, width 4.5mm, pitch 5mm size 10x12.5mm^2 drill 1.4mm pad 2.6mm terminal block Metz Connect 360425 size 9x9mm^2 drill 1.6mm pad 3.2mm terminal block RND 205-00298 pitch 10mm size 115x9mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00299, 3 pins, pitch 5.08mm, size 20.3x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00063 45Degree pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.5mm terminal block connector Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-2 pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.1mm terminal block Metz Connect Type094_RT03506HBLU, 6 pins, pitch 5mm, size 26.5x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00055 pitch 5mm size 60x9mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 6 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00055, 12 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00079 vertical pitch 2.5mm size 15.5x5mm^2 drill 1.2mm pad 3mm REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650173.pdf REDCUBE THR with internal clock rate. - One SPST switch to adjust CV output range, switch between 5v and 2.5v max. One per step, to indicate current step. (10 Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to enable/disable gate per the Eurorack standard Outputs saw, triangle, and square waves, with CV control of pitch and gate CV between 1 and 2 connected via insulated copper area below body, vias included (case drawing: https://ww2.minicircuits.com/case_style/MMM168.pdf, land pattern PL-176, including.
New Pull Request