synth_tools

Back

17.5x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR vertical pitch 3.5mm size 21x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 10mm, size 95x9mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Tantalum Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20035/dcrcwe3.pdf), generated with kicad-footprint-generator Hirose series connector, DF52-14S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator JST XH series connector, 53261-0371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator Hirose series connector, S05B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST XA series connector, 14110913010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE-A, 44 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator Inductor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py LQFN, 10 Pin (https://www.ti.com/lit/ds/symlink/tmp461.pdf#page=35 (RUN0010A)), generated with kicad-footprint-generator Soldered wire connection, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 1.4mm, length 8.5mm, width 2.5mm solder Pin_ press fit solder Pin_ with flat with hole, hole diameter 1.1mm, length 8.5mm, width 2.5mm Capacitor C, Rect series, Radial, pin pitch=31.00mm, , diameter=35.1mm, Vishay, TJ6, http://www.vishay.com/docs/34079/tj.pdf L_Toroid Vertical series Radial pin pitch 7.62mm length 16mm diameter 6.3mm Fastron VHBCC Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf Resistor Axial_DIN0922 series Axial Horizontal pin pitch 15.24mm diameter 17.3mm Bourns 2000 L_Toroid, Horizontal series, Radial, pin pitch=2.50mm, , diameter=8mm, Electrolytic Capacitor CP Axial series Axial Horizontal pin pitch 27.50mm length 29mm width 13mm Capacitor C, Rect series, Radial, pin pitch=15.75mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial series Radial pin pitch 29.30mm diameter 29.8mm muRATA 1400series Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=7.8mm, Fastron, 07HCP, http://www.abracon.com/Magnetics/radial/AISR875.pdf Inductor Radial series Radial pin pitch 4.00mm diameter 6.0mm Inductor, Radial series, Radial, pin pitch=27.50mm, , length*width=31.5*17mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 5.08mm size 25.4x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-306, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 55x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND.

New Pull Request

Labels Milestones