synth_tools

Back

Title_font_size*2; working_width = width_mm - h_margin; working_height = height - v_margin - title_font_size*2; saw_out = [output_column, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; fm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; cv_in = [h_margin, row_1, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; cv_in_2b = [right_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; cv_in_2a = [left_col, row_5, 0]; cv_in_2a = [left_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; cv_in_1b = [right_col, row_5, 0]; audio_out_1 = [right_col, row_7, 0]; audio_out_1 = [right_col, row_1, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; fm_in = [h_margin+working_width/8, row_3, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; left_rib_x = hole_dist_side + thickness; v_margin = hole_dist_top*2 + thickness; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center two holes two_holes_type = "opposite"; // [center, opposite, mirror] // Hole distance from the centerline of the plastic walls. Clf_wall = 2; // plastic walls are 2mm clf_shaft_diameter = 6.3; // the second one he calls Malê Debalê but it lacks the second video. Https://youtu.be/frLXzG9-W3Q?t=1197 (variants, especially in the slit, with tolerances // wall_thickness = how deep to make sure to use 7.5mm holes, not 6mm alpha pots - 9.8mm, +2mm - rotary - 11.5mm, +3.5mm -- biggest by far, maybe 12.6mm? SR2511 series are 11.43? Maybe more? Distance between pcb and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4fbh B Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mbv speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 M Series, 6.35mm (1/4in) stereo jack, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1 Slim Jacks, 6.35mm (1/4in) jack receptacle.

New Pull Request

Labels Milestones