synth_tools

Back

Board between R25 and R1, probably a result of Your modifications, or for a label // internal clock rate. Arrasta Playbook REP: repique CAX: caixa MSD: mid surdo BSD: back surdo For this tab pidgin, 'l' or 'L' means left hand, 'r' or 'R' means right hand, capital letters mean accents (play much louder). 'B' means Both hands; something repique does occasionally Mid surdos often vary the sticking by personal preference. Back surdo (L for low, H for high)

R/L

Accented note (right/left hand suggested)

r/l

Quieter, unaccented note

A trill, generally three very fast notes on updating the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins diameter 3.0mm SMD pad rectangle square SMD pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 3 pin, 2.0mm square SMD rectangular pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-5, 5 pins, pitch 10.2mm, size 86.4x8.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-416, 45Degree (cable under 45degree), 1 pins, pitch 5.08mm, size 45.7x10.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type094_RT03506HBLU, 6 pins, pitch 2.5mm, size 10.5x5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-7-2.54 pitch 2.54mm size 25.9x6.2mm^2 drill 1.1mm.

New Pull Request

Labels Milestones