Labels Milestones
BackBoard, requiring one 8-pin, one 14-pin and one 16-pin IC. But 3 panel-mounted UI elements for every step (plus some others), so plenty of room for a little complicated. At least it is safe to put the output jacks output_column = width_mm - thickness*2; // draw panel, subtract holes // label the whole thing? // top/bottom ribs? // top right [left_edge + height * rotate_vector_cos; points = [ [left_edge, rotate_vector_cos * rail_depth], // top stuff // step rotary switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tact sw push 12mm SW PUSH 12mm https://www.e-switch.com/system/asset/product_line/data_sheet/143/TL1100.pdf tact sw push 6mm smd CK components KMR2 tactile switch https://cdn.sos.sk/productdata/80/f6/aabf7be6/5gth9358222.pdf Switch NKK G1xJP http://www.nkkswitches.com/pdf/gwillum.pdf SWITCH TOGGLE ILLUM SPDT NKK Switch, single pole double throw, illuminated paddle, red and green LEDs K switch triple-pole double-throw DPDT spdt ON-ON illuminated red green D Push button switch, normally open, two pins.
New Pull Request