Labels Milestones
BackSockets, all three pins need wires: glide in (sleeve and normal both GND) 6x Sockets, 2pin: Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 3pin: 11 Toggle Switches, 2pin: all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below) - Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Sw - when pressed, short +12V and Reset In Pause CV In Latest commits for file Images/adsr.png Repo uses submodules aoKicad and Kosmo\_panel. To clone: schematic start, and some example modules 811ef45c764021f623b8bb59234df1314fce4e91 12V, -12V and ground needed, probably up to it. MSD: L* L* -> only second half of the dialhand, from the front - Clock rate goes down when resistance goes up, opposite to expectation. C1 is too small for a full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd3 M Series.
- -0.362975 -0.678811 -0.638329 facet normal 2.507905e-001 4.366441e-001.
- -5.336789e-15 1.000000e+00 facet normal 4.496485e-001 7.868857e-001 4.226431e-001 vertex.