synth_tools

Back

46007-1102, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py LQFP, 52 Pin (https://www.nxp.com/docs/en/package-information/98ARL10526D.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0160, 16 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator Hirose DF12E SMD, DF12E3.0-10DP-0.5V, 10 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator JST XH series connector, BM13B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator Molex SPOX Connector System, 43045-1821 (alternative finishes: 43045-200x), 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose series connector, 502494-1270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-4070, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0110, 11 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator JST PH series connector, BM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Soldered wire connection, for 4 times 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py DFN, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator Molex LY 20 series connector, 64800611622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator JST PHD series connector, BM16B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Wire Pad, Square, SMD Pad, 5mm x 10mm, MesurementPoint Square SMDPad 1mmx2mm ACDC-Converter, 10W, HiLink, HLK-10Mxx, THT, http://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9710W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%9110W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V1.8.pdf ACDC-Converter 10W THT HiLink board mount | | | | | | | J1 | 1 | 3_pin_Molex_header | 3 | 2N3904 | 0.2A Ic, 40V Vce, Small Signal NPN Transistor, TO-92 Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | R24, R26, R28 | 3 | A1M | **Potentiometer, 16 mm pots had long enough terminals, barely, to poke through the board, cross at 90° to minimize capacitance between traces - .3mm for non-power lines, .6mm if carrying power MK uses a ground plane. When two traces cross on opposite sides of the mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html Temperature and humidity module Digital Proximity, Ambient Light, RGB and Gesture Sensor (https://docs.broadcom.com/doc/AV02-4191EN DFN Sensor optical IR SST LuminOX Luminescence-based.

New Pull Request

Labels Milestones