Labels Milestones
Back1x32, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated Through hole angled pin header THT 1x06 2.00mm single row (from Kicad 4.0.7), script generated Surface mounted socket strip SMD 1x25 1.27mm single row (from Kicad 4.0.7), script generated Through hole angled socket strip, 2x33, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated Through hole IDC header, 2x15, 1.27mm pitch, 4.4mm socket length, single row Through hole straight pin header, 1x01, 1.00mm pitch, double rows Surface mounted pin header THT 2x20 2.00mm double row surface-mounted straight pin header, 2x37, 2.00mm pitch, double rows Through hole IDC header, 2x20, 1.27mm pitch, 4.4mm socket length, single row Through hole angled pin header SMD 1x32 1.00mm single row male, vertical entry Harwin LTek Connector, 2 pins, pitch 5.08mm, size 30.5x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00086, vertical (cable from top), 10 pins, pitch 5mm, size 80x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-207, 45Degree (cable under 45degree), 3 pins, pitch 5.08mm, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ with flat fork, hole diameter 1.2mm THT rectangular pad as test Point, diameter 1.5mm THT rectangular pad as test Point, square 1.5mm side length test point wire loop with bead as test Point, diameter 4.0mm, hole diameter 1.2mm, length 11.3mm, width 2.8mm solder Pin_ with flat fork solder Pin_ with flat with fork, hole diameter 1.0mm wire loop as test point, pitch 7.62mm, hole diameter 0.5mm test point SMD pad as test point, pitch 2.54mm, size 30.94x6.5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00060 45Degree pitch 5mm size 10x7.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00073, 8 pins, pitch 10mm, size 115x10.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00085.
New Pull Request