synth_tools

Back

5.6mm, pitch 10mm size 65x10.3mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type011_RT05504HBWC, 4 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.15mm, pad diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator TE, 826576-5, 5 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 8 Pin (http://www.ti.com/lit/ml/mpds382b/mpds382b.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.48mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST PHD series connector, SM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-1010, with PCB locator, 5 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90814-0014, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.2mm, height 3.6, Wuerth electronics 9776080960 (https://katalog.we-online.com/em/datasheet/9776080960.pdf), generated with kicad-footprint-generator Capacitor SMD 2220 (5650 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 44-Lead Plastic Thin Quad Flatpack - 10x10x2.5mm Body (http://www.onsemi.com/pub/Collateral/122BK.PDF PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor 932AZ.PDF TQFP128 14x14 / TQFP120 CASE 932AZ (see ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF PSOP44: plastic thin shrink small outline package; 16 leads; body width 7.5 mm; (see NXP sot054_po.pdf TO-92 leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf TO-126-2, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf TO-220F-3 Horizontal RM 10.9mm TO-247-2, Vertical, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf TO-220-15 Vertical RM 10.95mm SOT-93 TO-218-3, Horizontal, RM 1.27mm, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf TO-220-15 Horizontal RM 1.27mm staggered type-1 TO-220-9.

New Pull Request

Labels Milestones