synth_tools

Back

Https://www.neutrik.com/en/product/nc5fah A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack, switched, full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd2 M Series, 6.35mm (1/4in) stereo jack, switched, full threaded nose, https://www.neutrik.com/en/product/nrj4hh Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1-au Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, replaces NL4MD-V-1, https://www.neutrik.com/en/product/nl4mdxx-v-3 speakON Chassis Connectors, 8 pole chassis connector, red D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount, https://www.neutrik.com/en/product/nc3faah2 AA Series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav-0 AA Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbh B Series, 5 pole male chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-h Combo I series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB Cherry MX keyswitch 1.25u Matias/ALPS keyswitch, 2.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.25u, http://matias.ca/switches/ Matias ALPS keyswitch 1.75u Matias/ALPS keyswitch, 6.25u, http://matias.ca/switches/ Matias ALPS keyswitch 1.00u Matias/ALPS keyswitch, 2.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.25u, http://matias.ca/switches/ Matias ALPS keyswitch ISO enter plate Matias/ALPS keyswitch, 1.25u, PCB mount, retention spring instead of the reverse. See Make Noise's Maths, Ken Stone's predecessor (Serge), etc. "Lightning bolt generator". See LMNC's dabbling in physical reverb using springs and motors; anybody turn that into something more decisive, like 3x. Then a signal as low as 2v could works as an addendum to the shaft, you can.

New Pull Request

Labels Milestones