Labels Milestones
BackOutput Whatever appears on the streets of the knob (in mm). If you don't want a shaft, set this value to zero. // Length of the indenting cones. [mm] cone_indents_top_radius = 3.1; // Engraving depth. [mm] /* [External Indicator (optional)] */ // Four hole threshold (HP // margins from edges h_margin = hole_dist_side*4; v_margin = hole_dist_top*2; Potentiometers: - One idea: add a switch to adjust CV output range, switch between 5v and 2.5v max (or whatever is configured). Momentary-normal-off pushbutton to manually reset. LEDs: One per step, to indicate direction? Pointer1 = 0; // [0:No, 1:Yes] TaperAngle=asin(KnobHeight / (sqrt(pow(KnobHeight, 2) + pow(KnobMajorRadius-KnobMinorRadius,2)))) - 90; if (NotchedShaft==1) { cube([HoleDiameter/2, ShaftDiameter*2, ShaftLength], center=true); } 3D Printing/Pot_Knobs/10mm_potentiometer_tool.stl Executable file Unescape Hardware/Panel/precadsr_panel_al/precadsr_panel_al.pretty/Bigger_Push_Switch_Hole_NPTH.kicad_mod Normal file Unescape