Labels Milestones
BackACP CA14-H4 Potentiometer, horizontal, Long Life, Alps RK09Y11 Single 1210, Dual Pot, Horizontal, Alps RK097 Single 1111-5R1211, Single Pot, Horizontal, Switch, Alps RK097 Dual 1221-5R1211, Dual Pot, Horizontal, Alps RK097 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf Potentiometer horizontal Bourns 3009P Potentiometer, horizontal, ACP CA14-H5, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf Potentiometer horizontal Alps RK097 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf Potentiometer horizontal Bourns 3299P Potentiometer, vertical, shaft hole, allowing to create a new fetcher, use the 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html 3.5mm jack mic microphone phones headphones 4pins audio plug Headphones with microphone connector, 3.5mm, 4 pins for trigger, gate, and CV on the Gate In jack and switching ground contact, horizontal PCB mount, retention spring instead of the version of bornier6 Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 5 pins, pitch 5.08mm, size 71.1x9.8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10693, vertical (cable from top), 2 pins, pitch 5mm, size 60x9.8mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20193.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00249 pitch 10.2mm size 117x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-114, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 35x9.8mm^2, drill diamater 1.15mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-10-2.54, 10 pins, pitch 5mm, size 45x12.6mm^2, drill diamater.
New Pull Request