synth_tools

Back

Pitch, https://www.st.com/resource/en/datasheet/stm32wb15cc.pdf#page=119 ST WLCSP-52, ST die ID 464, 2.58x3.07mm, 36 Ball, 6x6 Layout, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf 3x3mm Body, 0.5mm Pitch, https://www.nxp.com/docs/en/package-information/98ASA00869D.pdf#page=1 MAPBGA 14x14x1.18 PKG, 14.0x14.0mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, https://www.nxp.com/docs/en/package-information/98ASA00855D.pdf#page=1 TFBGA-196, 11.0x11.0mm, 196 Ball, 14x14 Layout, 0.75mm Pitch, http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Series-Data-Sheet-DS60001476C.pdf#page=2956 FBGA-78, 10.6x7.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, https://www.infineon.com/cms/en/product/packages/PG-LFBGA/PG-LFBGA-292-11/ LFBGA-100, 10x10 raster, 4.775x5.041mm package, pitch 0.4mm; see section 7.2 of http://www.st.com/resource/en/datasheet/stm32f207vg.pdf WLCSP-66, 8x9 raster, 3.767x4.229mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f051t8.pdf WLCSP-36, 6x6 raster, 2.5x2.5mm package, pitch 0.4mm; see section 7.2 of http://www.st.com/resource/en/datasheet/stm32f207vg.pdf VFBGA-49, 7x7, 5x5mm package, pitch 0.5mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f091vb.pdf WLCSP-64, 8x8 raster, 3.347x3.585mm package, pitch 0.4mm; see section 6.6 of http://www.st.com/resource/en/datasheet/DM00273119.pdf X1-WLB0909, 0.89x0.89mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h7a3ai.pdf ST WLCSP-156, ST die ID 464, 2.58x3.07mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g483me.pdf ST WLCSP-81, ST die ID 464, 2.58x3.07mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102 ST WLCSP-25, ST die ID 469, 4.02x4.27mm, 81 Ball, 9x9 Layout, 0.5mm Pitch, DSC0010J, WSON, http://www.ti.com/lit/ds/symlink/tps61201.pdf Plastic Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/84299/vor1142b4.pdf SSO Stretched SO SOIC Pitch 2.54 SSO Stretched SO SOIC 1.27 16 12 Wide 16-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (4mm x 3mm) (see Linear Technology DFN_16_05-08-1732.pdf DHC Package; 18-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf DFN14, 4x4, 0.5P; CASE 506CM (see ON Semiconductor 506AH.PDF DFN, 6 Pin (https://www.ti.com/lit/ds/symlink/sn74auc1g04.pdf#page=24), Solder Mask Defined VSON, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 2.5/10-V-5.0-EX Terminal Block, 1732522 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732522), generated with kicad-footprint-generator JST PHD series connector, S15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator connector Hirose DF63 through hole, DF11-6DP-2DSA, 3 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator JST PH series connector, B14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py 8-Lead Plastic Stretched Small Outline http://www.vishay.com/docs/49633/sg2098.pdf SOP, 16 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with.

New Pull Request

Labels Milestones