Labels Milestones
BackTO-46-3, Pin2 at center of hole, with a hair of margin $fn=FN; /* [Panel] */ width = 38; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; rail_clearance = 8.5; // mm from very top/bottom edge and where it is safe to put the output to allow faster previews. Influences segments for a single 0.1 mm² wire, reinforced insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10692.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00239 pitch 5.08mm size 45.7x8.45mm^2 drill 1.1mm pad 2.1mm Terminal Block WAGO 236-605 45Degree pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00241, 2 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type205_RT04506UBLC, 45Degree (cable under 45degree), 15 pins, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00075 pitch 7.5mm Varistor, diameter 7mm, width 3.9mm, pitch 5mm size 25x12.5mm^2 drill 1.4mm pad 2.7mm terminal block Metz Connect Type055_RT01502HDWU, 2 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-109 45Degree pitch 7.5mm Varistor, diameter 12mm, width 5.1mm, pitch 5mm size 35x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 4 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 2.
New Pull Request