synth_tools

Back

Ref="J8" pin="1"/> main MK_VCO/Fireball/Fireball_panel.kicad_pro 505 lines { "board": { updates to rev 2 beta README.md | 12 delete mode 100644 Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Switch_Hole.kicad_mod delete mode 100644 Hardware/PCB/precadsr/ao_tht.pretty/OSHW-Logo2_7.3x6mm_SilkScreen.kicad_mod delete mode 100644 Hardware/PCB/precadsr/precadsr.pro delete mode 100644 Hardware/Panel/precadsr-panel/precadsr-panel.kicad_pro create mode 100644 (0 F.Cu signal (31 "B.Cu" signal (32 "B.Adhes" user "B.Adhesive" (33 "F.Adhes" user "F.Adhesive" (34 "B.Paste" user (35 "F.Paste" user (36 B.SilkS user (37 F.SilkS user hide (48 B.Fab user (49 F.Fab user (aux_axis_origin 0 0 Y N 2 N In normal position, loop is disconnected from trigger,\nnormalization is removed from gate jack, and\nsustain pot level is a little bit of margin $fn=FN; title_font = 10; // [1:1:84] fm_in = [input_column - h_margin/2, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; fm_pot = [input_column - h_margin/2, row_1, 0]; triangle_out = [third_col, fifth_row, 0]; //left_rib_x = thickness * 1; right_rib_x = width_mm - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Glide attenuator (B10k) (join two left pins from below - Clock rate (B100k) (not sure yet which 2 pins diameter 5.0mm z-position of LED center 1.6mm 2 pins diameter 3.0mm z-position of LED center 2.0mm, 2 pins, pitch 5mm, size 60x8.1mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR pitch 2.5mm size 10.5x5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00054, 11 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 51.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated.

New Pull Request

Labels Milestones