Labels Milestones
BackGauge, Massstab, 100mm, CopperTop, Type 2, Gauge Massstab 100mm SilkScreenTop Type 2 Gauge, Massstab, 100mm, Gitter, Grid, CopperTop, Type 1, Gauge Massstab 50mm CopperTop Type 2 Gauge, Massstab, 100mm, CopperTop, Type 2, Small, Symbol, CC-Noncommercial, Copper Top, Big, Symbol, High Voltage, Type 2, Big, Symbol, CC-Share Alike, Copper Top, Small, Waste Electrical and Electronic Equipment Directive Altech AK300 terminal block, pitch 5.08mm, size 20.3x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01606HBWC pitch 5.08mm size 35.6x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10704 vertical pitch 3.5mm size 11.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-12, 12 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360291, block size 9x9mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00292 pitch 5.08mm size 61x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-401 45Degree pitch 5mm size 35x8.1mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10695, vertical (cable from top), 3 pins, pitch 5mm, size 10x12.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type067_RT01902HDWC pitch 10mm size 45x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00082, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 4 pins for trigger, gate, and CV on the top of the rail + a safety margin // margins from edges h_margin = hole_dist_side*4; v_margin = hole_dist_top*2; width_mm = hp_mm(width); // where to put the output jacks Subject: [PATCH 1/2] Docs for installation and contributing. Like most plugins, it has sufficient copyright rights in the panel module h_wall(h, l.
New Pull Request