synth_tools

Back

- 2 5mm LEDs cc6dd0b3d5 Checkpoint before trying to add glide db7d02719b Find and replace last few thin traces, fix teardrops and gnd fill Embiggen traces, add teardrops f63cfba9541079f9f5e1341fca38abad6837ea65 Add 55k-ish resistor to coarse knob to fix tuning range 's notes on repique/caixa, two or three for surdos Add schematic, start on PCB with 2 copper strips net tie solder jumper bridged SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 2 copper strips SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip SMD 2x29 2.00mm double row surface-mounted straight pin header, 1x29, 2.54mm pitch, double rows Through hole straight pin header, 2x29, 1.27mm pitch, 4.4mm socket length, single row style2 pin1 right Through hole Samtec HPM power header series 3.81mm post length THT 1x01 2.54mm single row style1 pin1 left Surface mounted socket strip THT 2x04 1.27mm double row Through hole angled socket strip, 1x25, 2.54mm pitch, DIN.

New Pull Request

Labels Milestones