Labels Milestones
BackIVis@Bilkent. Permission is hereby granted, free of charge, to any person obtaining a copy Copyright (c) 2009,2014 Google Inc. Nor the names of its OF THIS DOCUMENT OR THE USE OF THIS SOFTWARE. BSD 2-Clause License Copyright (c) 2019 Lars Willighagen Permission is hereby granted, free of charge, to any person obtaining a copy ISC License Copyright (c) 2019-present Faye Amacker Permission is hereby granted, free of charge, to any part of this software for any number lower than mountHoleDiameter. Can be done, but requires a lot of wiring and increases risk of noise on power rails. Things best left to external modules: - CV-controlled clock. Presumably the CV in controls the clock oscillilator an external clock. One idea: add a voltage to trigger a second sequencer's run, which then re-triggers the first. More feature ideas: Trigger out - could be done with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with exploratory 8hp layout Bring in diylc and openscad design main MK_SEQ/Schematics/Unseen Servant/Unseen Servant.kicad_sch | 4890 width = 24; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; //mm first_col = 10.1+center_adjust; //mm second_col = width_mm/2; //mm third_col = 60.7-center_adjust; //mm cv_in = [first_col, fourth_row, 0]; //Fifth row interface placement saw_out = [third_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_5, 0]; audio_out_1 = [right_col, row_7, 0]; manual_1 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_1, 0]; square_out = [width_mm-h_margin, row_1, 0]; saw_out = [h_margin + working_width/4, row_1, 0.
- Href="https://gitea.circuitlocution.com/ /VCA/commit/2bd01a1ff2d30ca3cff647bbf3b80645437cc07c" rel="nofollow">2bd01a1ff2d30ca3cff647bbf3b80645437cc07c Add schematic, start on PCB.
- With radius: ", hole_r.
- Drumkit/README.md 3 lines bd1352a047 Fix annoyance.