Labels Milestones
Back205-00078 pitch 10mm Varistor, diameter 9mm, width 3.5mm, pitch 5mm size 61.5x15mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 4 2,5mm vertical SMD spring clamp terminal block RND 205-00051 pitch 5mm size 50x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-312 45Degree pitch 7.5mm Varistor, diameter 12mm, width 7.1mm, pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10691 pitch 3.5mm size 39.2x7mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MPT-0,5-12-2.54, 12 pins, pitch 5mm, size 15x8.1mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10698.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block connector http://www.phoenixcontact.com/us/products/1814728/pdf PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block RND 205-00235 pitch 5.08mm 0.25W = 1/4W length 6.3mm diameter 2.5mm Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=20mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Vertical pin pitch 10.00mm length 11.0mm width 3.5mm solder Pin_ with flat with hole, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ loose fit solder Pin_ with flat with fork, hole diameter 1.4mm wire loop as test Point, square 1.0mm side length, hole diameter 0.7mm THT pad as test point, pitch 7.62mm, hole diameter 2.0mm THT pad as test Point, square 3.0mm side length test point wire loop with bead as test point, loop diameter 1.8mm, hole diameter 0.9mm wire loop as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-403, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0300, 30 Circuits (https://www.molex.com/pdm_docs/sd/2005280300_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ina3221.pdf#page=44), generated with kicad-footprint-generator Hirose DF11.
New Pull Request