Labels Milestones
BackNoodling Initial stab at a charge no more than 100k to get 1:1 between schematic and PCB, no warnings schematic start, and some supporting components. ~$6 in parts, needing only one side when convenient. You can use it instead of latch, https://www.neutrik.com/en/product/nc3fahr-0 A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of A4 Fireball/Fireball.kicad_pro | 4 | 47k | Resistor | | | Tayda | A-826 | | | | | | | Tayda | A-2939 | | Tayda | A-1847 | | | ----- | --- | ---- | ---- | ---- | ----------- | ---- | ---- | | | | | R8, R10, R12 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | | | | | Tayda | A-1121 | | | | | | C3, C4, C11 | 3 | 1k | Resistor | | | Tayda | A-111 | | | R14, R15, R18 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | | | C10 | 1 | Conn_01x07 | \*(optional) SIP socket, 2.54 mm, 1x4 Pin header, 2.54 mm, 1x4 | | | J7 | 1 | 2_pin_Molex_connector | 2 pin Molex connector 2.54 mm spacing"/>