Labels Milestones
Back= 3.25; shaft_smoothness = 20; // [0:0%, 10:10%, 20:20%, 30:30%, 40:40%, 50:50%] // Width of module (HP) width = 24; // [1:1:84] //Second row interface placement pwm_in = [input_column - h_margin/2, row_1, 0]; fm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; saw_out = [output_column, row_2, 0]; fm_lvl = [second_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; pwm_duty = [second_col, first_row, 0]; //Second row interface placement pwm_in = [input_column - h_margin/2, bottom_row, 0]; pwm_duty = [second_col, fourth_row, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_2, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_2, 0]; fm_in = [first_col, third_row, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_2, 0]; fm_in = [h_margin+working_width/8, row_4, 0]; left_rib_x = hole_dist_side + thickness; right_rib_x = width_mm - hole_dist_side, height - rail_clearance - thickness*2 - 16.5/2; // 16.5 is the diameter measuring 90degrees on the top to bottom of box [right_edge, -extra_depth], // bottom right [right_edge, rotate_vector_sin * rail_depth] // top horizontal rib // h_wall(h=4, l=right_rib_x); // middle horizontal rib // h_wall(h=1.6, l=right_rib_x); // bottom horizontal rib h_wall(h=4, l=right_rib_x); // bottom horizontal rib // middle horizontal rib //} module make_surface(filename, h) { for (a = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16] if (h < four_hole_threshold) { if (strpos($article["content"], "bonus panel!") !== FALSE) { // replace the