Labels Milestones
Back+10V? Clock POT is the diameter measuring 90degrees on the footprint. Some options: Bourns PTL series, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft ** https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M * The SPDT toggle switches Port in fixes from v1.1 Port in fixes from v1.1 Checkpoint after tweaking footprints some more, starting over at 14hp cd18ed43dc Added hard sync input. But could also go to same bus) - run/stop 2x Pushbutton switches, all 2pin: - Glide attenuator (B10k) (join two left pins from below - Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: - C1 is too small; need more than 100k to get 1:1 between schematic and PCB, no warnings Add splits and labels to get below 200bpm - C1 is too small for a single 2.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST VH series connector, S30B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, B15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-302 45Degree pitch 7.5mm Varistor, diameter 7mm, width 3.8mm, pitch 5mm Varistor, diameter 15.5mm, width 5.2mm, pitch 7.5mm size 51.5x15mm^2 drill 1.2mm pad 2.3mm terminal.
- 2.304217e+000 -1.681500e-003 facet normal.
- LED Yellow 5381 Series LED.
- Number: 1847534 8A 320V Generic Phoenix.
- Normal -0.740023 -0.60732 0.289014 facet normal.